A company uses the dollar-value LIFO method to report inventory

Favorited Content

Publication date: 31 Dec 2021   

us Inventory guide 3.2

LIFO cost may be computed using either the specific-goods method or the dollar-value method. The dollar-value approach is more common and encompasses several acceptable computational techniques.

3.2.1 Specific-goods LIFO

Under the specific-goods method, calculations are based on physical units and require separate computations for similar products or items in inventory. Therefore, this method is generally used only in situations involving a limited number of inventory items or basic commodities that can be measured in terms of a common denominator, such as pounds, gallons, or feet. The quantity of each type of item in ending inventory is compared to the quantity of similar items in beginning inventory. Increments (i.e., the layer or increase in inventory quantities generated during the current period) are priced at current-year cost and decrements (i.e., a decrease in quantities often referred to as liquidations or erosions) are included in cost of sales at the unit cost of each respective layer, beginning with the most recent.

Since a separate calculation is made for each type of item, the specific-goods approach may result in numerous liquidations if the quantities of individual inventory items fluctuate from year to year (even though the total number of inventory items remains constant). An increase in the quantity of one item does not offset a decrease in another unless the two items are similar enough to be considered a single specific good (e.g., gasoline of different octane ratings). The specific-goods method, therefore, requires that records be maintained of the quantities and costs of each inventory item for each year in which an increment occurred.

3.2.2 Dollar-value LIFO

Under dollar-value LIFO, inventory quantities are measured in terms of “base-year” dollar value rather than on physical units. Inventory is divided into “pools” of similar items and quantities for each pool are determined based on the cost of items as of a specific date (the base year). The base year is typically the beginning of the year in which LIFO is elected. Increments and decrements are determined by comparing the ending inventory at its base-year cost with the opening inventory at base-year cost. Increments are valued at current-year cost. Decrements are removed from inventory at historical LIFO cost for each respective layer on a LIFO basis. Since a dollar-value pool contains a broad mix of inventory items, new items may be introduced and old items may disappear without causing any decrements in the pool.

The key element in any application of dollar-value LIFO is the calculation of an inflation index, which is needed to relate current costs in inventory to base year costs. The following methods can be used to calculate the inflation index.

3.2.2.1 Dollar-value LIFO — double extension

Under the double-extension method, total base-year cost of ending inventory (for computing increments and decrements) is determined by extending each item at its base-year cost. Each item is also extended at current-year cost to develop an index of current-year cost to base-year cost. That cumulative index is applied to any increment (increase in the quantity of base-year dollars in year-end inventory) in order to value the increment (layer) at current-year cost.

3.2.2.2 Dollar-value LIFO — index method

The index method permits the double extension of a sample of products to represent the inventory population. Under the index method, the inventory at current-year cost is converted to base-year cost using an index developed from a sample of inventory. The index may be computed by double-extending a representative portion of the inventory in a pool or by using sound and consistent statistical methods. Once the base-year cost has been determined, increments are measured in the same manner as under the double-extension method. For tax LIFO calculations, the IRS has historically concluded that the calculation of the index should include all inventory segments. For example, the IRS may object to a sampling method that excludes new inventory items from the index calculation.

3.2.2.3 Dollar-value LIFO — link-chain method

Under the link-chain method, an index is computed that measures the price-level change for the current year based on the ratio of the year-end inventory at current-year costs to the year-end inventory at prior-year costs. The current-year index may be computed by extending 100% of the items or a sample of items in inventory. By multiplying the current-year index by the prior cumulative index, a new cumulative index is developed that, when applied to the closing inventory at current-year prices, results in the calculation of the closing inventory at base-year cost. The closing inventory at base-year cost is then compared to opening inventory at base-year cost to determine whether an increment or decrement has occurred. For tax purposes, the IRS regulations limit the availability of the link-chain method to companies that can demonstrate that, because of frequent changes in inventory items, the double-extension or index method is not practical. As with the index method, the IRS has historically concluded that all inventory segments should be included in the calculation of the index (e.g., new items cannot be excluded).

3.2.2.4 Dollar-value LIFO — published indices

Instead of computing their own indices, retail department stores may use the Department Store Inventory Price Indices prepared monthly by the Bureau of Labor Statistics. Under this method, a single index is used for each department. In addition, specialty stores are allowed to use the Department Store Inventory Price Indices if they have a fairly broad variety of items comparable to a department in a department store.

3.2.2.5 Simplified LIFO

IRS Regulations permit the use of a simplified LIFO inventory method for tax purposes. Entities can elect to use a separate pool for each major category of inventory items and use a single published index for each pool.

Under this simplified approach, businesses can elect to establish LIFO pools using special rules provided under the Inventory Price Index Computation (IPIC) method. Under the IPIC method, the computations of inflation are based on externally published index reports (e.g., the Consumer Price Index Detailed Report or the Producer Price Index Detailed Report).

Given that IPIC is determined using externally-published indices that are general in nature, this method generally does not reflect a specific entity’s inventory costing unique to its individual circumstances, meaning it does not consider, for example, the specific entity’s vendor rebate and allowance programs, sourcing decisions, or price fluctuations based on inventory quantity discounts. In order for the application of IPIC to be considered acceptable for financial reporting purposes, the results of applying IPIC would need to be reviewed annually to ensure that they are consistent with the entity’s actual cost experience. Therefore, much if not all of the potential administrative relief of using a simplified method for tax purposes would be unlikely to be realized. Except in circumstances when it can be demonstrated that the use of IPIC approximates the financial reporting results had an acceptable LIFO method for valuing inventory been used, we do not believe the use of IPIC or another simplified index method is appropriate.

PwC. All rights reserved. PwC refers to the US member firm or one of its subsidiaries or affiliates, and may sometimes refer to the PwC network. Each member firm is a separate legal entity. Please see www.pwc.com/structure for further details. This content is for general information purposes only, and should not be used as a substitute for consultation with professional advisors.

  • Table of contents

Please ensure
that you select
Print Background (colors and images) when printing.

Your recent searches

    Suggested terms

      Suggested guidance

        • current step: 1. Warning 2
        • 2. Warning 2
        • 3. Warning 2

        Warning 2

        {{isCompleteProfile ? "Setup your profile before Sign In" : "Profile"}}

        {{editProfile.email}}

        First name*

        {{validation.firstName.errorMessage}}

        Last name*

        {{validation.lastName.errorMessage}}

        Country or region*

        Required field

        Functional role*

        Required field

        Company*

        Company name must be at least two characters long

        Newsletter (optional)

        Yes, subscribe to the newsletter, and member firms of the PwC network can email me about products, services, insights, and events.

        Terms of Compliance*

        By providing your details and checking the box, you acknowledge you have read the Privacy Statement and Terms and Conditions (including the sections in each related to Registered Users).*

        Required field

        A company uses the dollar-value LIFO method to report inventory
        The following fields are not editable on this screen: First Name, Last Name, Company, and Country or Region. Please reach out to if you need any assistance modifying these fields.

        Site and content preferences

        You can set the default content filter to expand search across territories.

        Site and content preferences (continued)

        Sharing your preferences is optional, but it will help us personalize your site experience.

        Welcome to Viewpoint, the new platform that replaces Inform. Once you have viewed this piece of content, to ensure you can access the content most relevant to you, please confirm your territory.

        Viewpoint allows you to save up to 25 favorites.

        Consider removing one of your current favorites in order to to add a new one.

        Are you sure you would like to remove this page from your list?

        Please Sign in to set this content as a favorite.

        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory
        A company uses the dollar-value LIFO method to report inventory

        Hello and welcome to Viewpoint

        Your go-to resource for timely and relevant accounting, auditing, reporting and business insights. Follow along as we demonstrate how to use the site

        Before we start.

        Choose your preferred language below.

        Your browser does not support the video tag.

        Back to the Original document This view is read only. To access this content, click on "Go to content"

        What is the dollar value method of LIFO inventory valuation?

        The dollar-value method of valuing LIFO inventories is a method of determining cost by using “base-year” costs expressed in total dollars rather than the quantity and price of specific goods as the unit of measurement. Under this method, the taxpayer groups goods contained in the inventory into a pool(s).

        Why would a company use dollar value LIFO?

        Companies that use the dollar-value LIFO method are those that both maintain a large number of products, and expect that product mix to change substantially in the future. The dollar-value LIFO method allows companies to avoid calculating individual price layers for each item of inventory.

        How do you calculate ending inventory using dollar value LIFO?

        To calculate the index, follow these steps: Calculate the extended cost of the ending inventory at base year prices. Calculate the extended cost of the ending inventory at the most recent prices. Divide the total extended cost at the most recent prices by the total extended cost at base year prices.

        What does dollar value LIFO mean?

        Under this method, goods are combined into pools and all increases and decreases in a pool are measured in terms of total dollar value. The pools created under this method are, therefore, known as dollar-value LIFO pools.