Are you facing problems with copying files from your MacBook to your External Hard Disk Drive? The chances are good that you’re trying
to pair the External HDD with your Mac for the first time. And, to your bad, you’re facing problems with that. Are you scrolling through the internet to find a possible solution? Well, worry not, it’s not as difficult as you think. Reading on, you’ll know the key to fix copy MacBook data to the External HDD. Can’t wait to know how? Buckle up, and let’s get going: One of the most straightforward solutions lies in formatting your external hard drive. By doing so, you’ll be able to wipe out the contents of your hard drive. If the external HDD contains data, which you’re able to access, then consider copying the same to your PC, Mac, or any other storage device. After which, you can proceed with the format option to delete all the files with complete ease- all in one go. The first step lies in
connecting your external drive to your Mac machine. When you click here on your external drive, you still see that it is not recognized on your Mac. Well, reading some valuable resources is the best you can do in the circumstances like this. By doing so, you’ll be able to copy data from Mac to your External Drive with complete ease. Now that you have a fix to copy files from Mac to Hard Drive, it becomes vital to know the steps of doing so. The Finder application on Mac enables you to transfer your files on and off. Connecting your external hard drive to Mac makes it appear under the Devices menu in the Finder window.
Copy or paste necessary files or drag and drop these items to your hard drive. Select the files or
folders you wish to copy and transfer to your external drive. Now hold down the “Command” button and select multiple items simultaneously. Know that there are potential solutions for a Mac that is not reading an external hard drive. If you’re searching, always look in for one that offers plenty of customizations and power in an easy-to-use interface. All you’ve to do is look for software, and you will never have to worry about crashing or corrupting external drives again. A present marketer, editor, and implementer. She aims to utilize her knowledge acquired while working on a professional desk to craft engaging content for users, marketing thought leaders and companies that have their hands full with clients and projects.
On this page, I'll be showing you the complete process of how to configuring NTFS storage devices and make them accessible on a Mac computer. If you are looking for a way to copy files from Mac to an external hard drive or USB in NTFS format, follow the guide below. You'll make the NTFS storage devices work on your Mac computer. How Do I Copy Files from My Mac to an External Hard Drive in NTFS Format?Can Mac use the NTFS external hard drive? I wanted to copy some important files from Mac to my external hard drive as a backup but just couldn't. Is there a way that can configure Mac to work with Windows NT File System? Yes! The reason why you can't transfer files between a Mac computer and an NTFS external storage device is that the NTFS format is not a compatible file system in macOS. Apple macOS doesn't have the right to write to an NTFS device. And that explains why that you can only view and see the content in your external hard drive but can't make any changes to the content, such as editing, modifying, correcting, removing, or deleting. So how to make it possible to copy files from Mac to an external hard drive? Follow the complete guides below, you'll acquire the access to copy or transfer files between Mac and the NTFS external hard drive successfully. Guide 1. Enable NTFS Write Support to External Hard Drive on MacTo configure Mac working with NTFS-formatted storage devices, your first step is to enable NTFS write support on Mac computer. Here we connected 3 practical methods with detailed steps that you can follow a favored method to start: #1. Format NTFS External Disk to FAT Your Quick Guide:
Let's get started. Method 1. Format NTFS External Hard Drive to FATTool: Mac Disk Utility Duration: 2-5 minutes Apple Mac operating systems are designed to support HPFS, APFS, HFS+, HFS, and FAT32, etc., file systems. As for the NTFS format, macOS only supports reading content in the device. To obtain access to modify, correct, add, or remove data from the NTFS external hard drive on Mac, you can format the device to the FAT file system. Note that this will result in data loss. So make sure that you back up essential files in advance. Here are the steps to format NTFS external hard drive to FAT on Mac: Step 1. Connect the NTFS external hard drive to Mac. Step 2. Go to Finder, click "Applications" > "Utilities" > Double-click to open Disk Utility. Step 3. Select the NTFS external hard drive and click "Erase" in Disk Utility. Step 4. Select "MS-DOS (FAT)" as the new file system format for the external hard drive, then click "Erase". Method 2. 1-Click to Enable NTFS Write Support via EaseUS NTFS for MacTool: EaseUS NTFS for Mac Duration: Within 1 Minute Is there a way that can configure NTFS external hard drive access on Mac without formatting? Sure! Third-party software like EaseUS NTFS for Mac can enable NTFS write support on Mac so to make your NTFS external hard drive writable automatically. With it, you can manually or automatically enable accessibility on Mac to read, write, modify, copy, transfer, and even delete files on an NTFS external hard drive. How to use it? Here are the steps: Step 1. Launch and activate EaseUS NTFS for Mac. Click "I already have a license" to unlock this software. Step 2. Connect an NTFS drive to Mac, EaseUS NTFS for Mac will automatically detect the device. Select your drive and you'll see it's now marked as 'Read-only". Click "Enable Writable" to add read and write rights to the drive. Step 3. When the state of NTFS drives turns into "Writable". Step 4. EaseUS NTFS for Mac will pops up a window to help Mac get access to the NTFS drive:
Step 5. When EaseUS NTFS for Mac restarts, you can then open to check, read, write, and even modify saved data on the NTFS device. As long as you enabled the NTFS write support to your external EaseUS NTFS for Mac will detect the NTFS external hard drive and automatically enable it on Mac. After this, you can open the NTFS external hard drive on a Mac computer and make changes to the saved data flexibly. Method 3. Enable NTFS Write Support via TerminalTool: Mac Command Tool - Terminal Duration: 2-3 minutes The last way that you can try is to turn to the Mac built-in command tool -Terminal for help. It requires that you need to be familiar with Mac computer operations and be very careful. Any false operation may cause serious results. Let's see how to make your NTFS external hard drive writeable on Mac computers: Step 1. Go to Finder > Click "Applicatinos" > "Utilites" > Double-click to open "Terminal". Step 2. Connect the NTFS external hard drive to your Mac computer. Step 3. Type sudo nano /etc/fstab in Terminal and press Return. Step 4. Type LABEL=NAME none ntfs rw, auto, nobrowse in Terminal and replace NAME with the name of your NTFS external hard drive. Step 5. Press Control + O to save the changes. Step 6. Press Control + X to close Terminal. Step 7. Go to Finder, click "Go" > "Go to Folder" > Type "/Volumes" and click "Go". After this, Mac will list your external hard drive with the internal hard drives on Mac in the Volumes pane. And you can then follow the guide in the next part to copy files from Mac to an external hard drive successfully. Guide 2. Transfer or Copy Files from Mac to External Hard DriveStep 1. Open the external hard drive. Step 2. Open the internal disk or folder, where you saved essential files for copying or transferring. Step 3. Drag the files from a Mac local volume or folder and drop the data into the external hard drive. Repeat the operation until you copied all the desired files from Mac to the external hard drive. NTFS External Disks Need Write Support for File Transferring on Mac, Go and Make It Work NowNote that when you directly connect an external hard drive to a Mac computer, you'll be presented with Read-Only limits on the disk. As a result, you can only view files and file content on the external hard drive on Mac. To obtain access to editing, modifying, copying, transferring, or even deleting files or file content on the NTFS external hard drive, you need to first enable NTFS write support on Mac. To do so, you have three options here for help:
For the easiest solution, don't miss EaseUS NTFS for Mac as it'll automatically enable the drive modification authority to your Mac computer once the NTFS external hard drive is detected by this software. To make use of the NTFS external hard drive between your Windows and Mac computer, follow the solutions on this page to make it work now. Why can't I add files to my external hard drive Mac?The drive is set to read-only permissions, so you can't add or delete files. The external hard drive uses a partially supported file system, like NTFS, which macOS only supports as read-only. The drive is encrypted, meaning you can't access it in any way until you've decrypted the disk.
How do I copy files from Mac to hard drive?Click the Finder icon in the Dock to open a Finder window, then do one of the following to move your files. Move files to the storage device: Select one or more files on the desktop or in a folder, then drag them to the storage device, listed below Locations in the Finder sidebar.
How do you copy and paste from a Mac to an external hard drive?Faster method of Copy and Paste:. Select the item you want to Copy.. Hold down the Command key (⌘) and press ( C ). Inside the location where you want to save the file, hold down the Command key (⌘) and press (V).. Why files are not copying to external hard drive?If you can't copy files to external hard drive and it's frozen, there is an off-chance that the drive is improperly formatted or something is wrong with the drive's software aspect. You can fix it by reformatting the drive to NTFS.
|