What structural differences between glycogen and cellulose explain their functional differences?

Home
Table of Contents
Biomolecules Gateway Page
Jmol Tutorial

In this module:

Introduction
Definition
Linear and Cyclic Forms
Anomers
Disaccharides
Polysaccharides
Variations
Other Functions

Polysaccharides

What structural differences between glycogen and cellulose explain their functional differences?
are long chains of monosaccharides linked by glycosidic bonds. Three important polysaccharides, starch, glycogen, and cellulose, are composed of glucose. Starch and glycogen serve as short-term energy stores in plants and animals, respectively. The glucose monomers are linked by α glycosidic bonds.

What structural differences between glycogen and cellulose explain their functional differences?
What structural differences between glycogen and cellulose explain their functional differences?
Glycogen and starch are highly branched, as the diagram at right shows. What advantage do you think branching gives to the organism? Type your answer in the space below and click on the Check button.

What structural differences between glycogen and cellulose explain their functional differences?

Please enter your answer in the space at left.

Now compare your answer with the one below.

The enzymes that build up and break down glycogen and starch act on the free ends of the polysaccharides. Having a great deal of branching ensures that plants and animals can quickly add to their energy supply when energy is plentiful, or break it down the storage molecules when energy is in short supply.

Cellulose is the most abundant organic molecule on earth, since it is the main component of plant cell walls. Wood, paper, and cotton are the most common forms of cellulose. The glucose units in cellulose are linked by β glycosidic bonds, different than the α glycosidic bonds found in glycogen and starch. Cellulose has more hydrogen bonds between adjacent glucose units, both within a chain and between adjacent chains, making it a tougher fiber than glycogen or starch. This is why wood is so tough.

  1. Last updated
  2. Save as PDF
  • Page ID17529
  • Learning Objectives
    • To compare and contrast the structures and uses of starch, glycogen, and cellulose.

    The polysaccharides are the most abundant carbohydrates in nature and serve a variety of functions, such as energy storage or as components of plant cell walls. Polysaccharides are very large polymers composed of tens to thousands of monosaccharides joined together by glycosidic linkages. The three most abundant polysaccharides are starch, glycogen, and cellulose. These three are referred to as homopolymers because each yields only one type of monosaccharide (glucose) after complete hydrolysis. Heteropolymers may contain sugar acids, amino sugars, or noncarbohydrate substances in addition to monosaccharides. Heteropolymers are common in nature (gums, pectins, and other substances) but will not be discussed further in this textbook. The polysaccharides are nonreducing carbohydrates, are not sweet tasting, and do not undergo mutarotation.

    Starch

    Starch is the most important source of carbohydrates in the human diet and accounts for more than 50% of our carbohydrate intake. It occurs in plants in the form of granules, and these are particularly abundant in seeds (especially the cereal grains) and tubers, where they serve as a storage form of carbohydrates. The breakdown of starch to glucose nourishes the plant during periods of reduced photosynthetic activity. We often think of potatoes as a “starchy” food, yet other plants contain a much greater percentage of starch (potatoes 15%, wheat 55%, corn 65%, and rice 75%). Commercial starch is a white powder.

    Starch is a mixture of two polymers: amylose and amylopectin. Natural starches consist of about 10%–30% amylose and 70%–90% amylopectin. Amylose is a linear polysaccharide composed entirely of D-glucose units joined by the α-1,4-glycosidic linkages we saw in maltose (part (a) of Figure \(\PageIndex{1}\)). Experimental evidence indicates that amylose is not a straight chain of glucose units but instead is coiled like a spring, with six glucose monomers per turn (part (b) of Figure \(\PageIndex{1}\)). When coiled in this fashion, amylose has just enough room in its core to accommodate an iodine molecule. The characteristic blue-violet color that appears when starch is treated with iodine is due to the formation of the amylose-iodine complex. This color test is sensitive enough to detect even minute amounts of starch in solution.

    What structural differences between glycogen and cellulose explain their functional differences?
    Figure \(\PageIndex{1}\): Amylose. (a) Amylose is a linear chain of α-D-glucose units joined together by α-1,4-glycosidic bonds. (b) Because of hydrogen bonding, amylose acquires a spiral structure that contains six glucose units per turn.

    Amylopectin is a branched-chain polysaccharide composed of glucose units linked primarily by α-1,4-glycosidic bonds but with occasional α-1,6-glycosidic bonds, which are responsible for the branching. A molecule of amylopectin may contain many thousands of glucose units with branch points occurring about every 25–30 units (Figure \(\PageIndex{2}\)). The helical structure of amylopectin is disrupted by the branching of the chain, so instead of the deep blue-violet color amylose gives with iodine, amylopectin produces a less intense reddish brown.

    What structural differences between glycogen and cellulose explain their functional differences?
    Figure \(\PageIndex{2}\): Representation of the Branching in Amylopectin and Glycogen. Both amylopectin and glycogen contain branch points that are linked through α-1,6-linkages. These branch points occur more often in glycogen.

    Dextrins are glucose polysaccharides of intermediate size. The shine and stiffness imparted to clothing by starch are due to the presence of dextrins formed when clothing is ironed. Because of their characteristic stickiness with wetting, dextrins are used as adhesives on stamps, envelopes, and labels; as binders to hold pills and tablets together; and as pastes. Dextrins are more easily digested than starch and are therefore used extensively in the commercial preparation of infant foods.

    The complete hydrolysis of starch yields, in successive stages, glucose:

    starch → dextrins → maltose → glucose

    In the human body, several enzymes known collectively as amylases degrade starch sequentially into usable glucose units.

    Glycogen

    Glycogen is the energy reserve carbohydrate of animals. Practically all mammalian cells contain some stored carbohydrates in the form of glycogen, but it is especially abundant in the liver (4%–8% by weight of tissue) and in skeletal muscle cells (0.5%–1.0%). Like starch in plants, glycogen is found as granules in liver and muscle cells. When fasting, animals draw on these glycogen reserves during the first day without food to obtain the glucose needed to maintain metabolic balance.

    Glycogen is structurally quite similar to amylopectin, although glycogen is more highly branched (8–12 glucose units between branches) and the branches are shorter. When treated with iodine, glycogen gives a reddish brown color. Glycogen can be broken down into its D-glucose subunits by acid hydrolysis or by the same enzymes that catalyze the breakdown of starch. In animals, the enzyme phosphorylase catalyzes the breakdown of glycogen to phosphate esters of glucose.

    About 70% of the total glycogen in the body is stored in muscle cells. Although the percentage of glycogen (by weight) is higher in the liver, the much greater mass of skeletal muscle stores a greater total amount of glycogen.

    Cellulose

    Cellulose, a fibrous carbohydrate found in all plants, is the structural component of plant cell walls. Because the earth is covered with vegetation, cellulose is the most abundant of all carbohydrates, accounting for over 50% of all the carbon found in the vegetable kingdom. Cotton fibrils and filter paper are almost entirely cellulose (about 95%), wood is about 50% cellulose, and the dry weight of leaves is about 10%–20% cellulose. The largest use of cellulose is in the manufacture of paper and paper products. Although the use of noncellulose synthetic fibers is increasing, rayon (made from cellulose) and cotton still account for over 70% of textile production.

    Like amylose, cellulose is a linear polymer of glucose. It differs, however, in that the glucose units are joined by β-1,4-glycosidic linkages, producing a more extended structure than amylose (part (a) of Figure \(\PageIndex{3}\)). This extreme linearity allows a great deal of hydrogen bonding between OH groups on adjacent chains, causing them to pack closely into fibers (part (b) of Figure \(\PageIndex{3}\)). As a result, cellulose exhibits little interaction with water or any other solvent. Cotton and wood, for example, are completely insoluble in water and have considerable mechanical strength. Because cellulose does not have a helical structure, it does not bind to iodine to form a colored product.

    What structural differences between glycogen and cellulose explain their functional differences?
    Figure \(\PageIndex{3}\): Cellulose. (a) There is extensive hydrogen bonding in the structure of cellulose. (b) In this electron micrograph of the cell wall of an alga, the wall consists of successive layers of cellulose fibers in parallel arrangement.

    Cellulose yields D-glucose after complete acid hydrolysis, yet humans are unable to metabolize cellulose as a source of glucose. Our digestive juices lack enzymes that can hydrolyze the β-glycosidic linkages found in cellulose, so although we can eat potatoes, we cannot eat grass. However, certain microorganisms can digest cellulose because they make the enzyme cellulase, which catalyzes the hydrolysis of cellulose. The presence of these microorganisms in the digestive tracts of herbivorous animals (such as cows, horses, and sheep) allows these animals to degrade the cellulose from plant material into glucose for energy. Termites also contain cellulase-secreting microorganisms and thus can subsist on a wood diet. This example once again demonstrates the extreme stereospecificity of biochemical processes.

    Career Focus: Certified Diabetes Educator

    Certified diabetes educators come from a variety of health professions, such as nursing and dietetics, and specialize in the education and treatment of patients with diabetes. A diabetes educator will work with patients to manage their diabetes. This involves teaching the patient to monitor blood sugar levels, make good food choices, develop and maintain an exercise program, and take medication, if required.

    What structural differences between glycogen and cellulose explain their functional differences?
    A certified diabetes educator at Naval Medical Center Portsmouth (left) and a registered dietician at the medical center (center), provide nutritional information to a diabetes patient and her mother at the Diabetes Boot Camp.

    Diabetes educators also work with hospital or nursing home staff to improve the care of diabetic patients. Educators must be willing to spend time attending meetings and reading the current literature to maintain their knowledge of diabetes medications, nutrition, and blood monitoring devices so that they can pass this information to their patients.

    Summary

    Starch is a storage form of energy in plants. It contains two polymers composed of glucose units: amylose (linear) and amylopectin (branched). Glycogen is a storage form of energy in animals. It is a branched polymer composed of glucose units. It is more highly branched than amylopectin. Cellulose is a structural polymer of glucose units found in plants. It is a linear polymer with the glucose units linked through β-1,4-glycosidic bonds.

    What are the structural differences between glycogen and cellulose?

    Starch, cellulose and glycogen are all polysaccharides made up of glucose subunits. Starch and glycogen are made up of 𝜶-glucose subunits, whereas cellulose is made up of 𝛃-glucose subunits. Cellulose is unbranched and a straight-chain polymer of glucose, whereas starch and glycogen are branched.

    What is the major functional difference between cellulose and glycogen?

    Glycogen is readily broken down and reassembled by animal cells. Cellulose, however, is only found in plant cells. Its beta 1,4-glycosidic linkages can't be broken down in our bodies.

    What is the structural difference between glucose and cellulose?

    Glucose is made from the process of photosynthesis while cellulose is made from many chains of glucose after glucose is dissolved as energy and stored as starch. 2. Glucose is considered as a simple sugar while cellulose is a complex carbohydrate.

    What is the difference between glycogen and cellulose quizlet?

    Cellulose differs from starch and glycogen in one major respect. It is made of monomers of beta glucose rather than alpha glucose. This seemingly small variation produces fundamental differences in the structure and function of this polysaccharide.

    How do glycogen and starch differ in terms of their structures and functions?

    Both starch (amylose and amylopectin) and glycogen function as energy storage molecules. However, glycogen is produced, stored, and used as an energy reserve by animals, whereas starches are produced, stored and used as an energy reserve by plants.

    What are the chemical and structural differences between cellulose and glycogen quizlet?

    1. cellulose is made up of unbranched chains; glycogen is highly branched. 2. glycogen is made up of alpha-glucose monomers, cellulose is made up of beta-glucose.