How does light information move from the photoreceptors to the optic nerve?

The rods are most sensitive to light and dark changes, shape and movement and contain only one type of light-sensitive pigment. Rods are not good for color vision. In a dim room, however, we use mainly our rods, but we are "color blind." Rods are more numerous than cones in the periphery of the retina. Next time you want to see a dim star at night, try to look at it with your peripheral vision and use your ROD VISION to see the dim star. There are about 120 million rods in the human retina.

How does light information move from the photoreceptors to the optic nerve?
The cones are not as sensitive to light as the rods. However, cones are most sensitive to one of three different colors (green, red or blue). Signals from the cones are sent to the brain which then translates these messages into the perception of color. Cones, however, work only in bright light. That's why you cannot see color very well in dark places. So, the cones are used for color vision and are better suited for detecting fine details. There are about 6 million cones in the human retina.Some people cannot tell some colors from others - these people are "color blind." Someone who is color blind does not have a particular type of cone in the retina or one type of cone may be weak. In the general population, about 8% of all males are color blind and about 0.5% of all females are color blind.

How does light information move from the photoreceptors to the optic nerve?
How does light information move from the photoreceptors to the optic nerve?
The fovea, shown here on the left, is the central region of the retina that provides for the most clear vision. In the fovea, there are NO rods...only cones. The cones are also packed closer together here in the fovea than in the rest of the retina. Also, blood vessels and nerve fibers go around the fovea so light has a direct path to the photoreceptors.

Here is an easy way to demonstrate the sensitivity of your foveal vision. Stare at the "g" in the word "light" in middle of the following sentence:

"Your vision is best when light falls on the fovea."

The "g" in "light" will be clear, but words and letters on either side of the "g" will not be clear.

One part of the retina does NOT contain any photoreceptors. This is our "blind spot." Therefore any image that falls on this region will NOT be seen. It is in this region that the optic nerves come together and exit the eye on their way to the brain.

To find your blind spot, look at the image below or draw it on a piece of paper:

How does light information move from the photoreceptors to the optic nerve?

Close your left eye.

Hold the image (or place your head from the computer monitor) about 20 inches away. With your right eye, look at the dot. Slowly bring the image (or move your head) closer while looking at the dot. At a certain distance, the + will disappear from sight...this is when the + falls on the blind spot of your retina. Reverse the process. Close your right eye and look at the + with your left eye. Move the image slowly closer to you and the dot should disappear.

Here is another image that will help you find your blind spot.

How does light information move from the photoreceptors to the optic nerve?

For this image, close your right eye. With your left eye, look at the red circle. Slowly move your head closer to the image. At a certain distance, the blue line will not look broken!

Did you know?

How does light information move from the photoreceptors to the optic nerve?
Why can't you see very well when you first go into a darkened room like a movie theater? When you first enter the movie theater, the cones in your retina are working and the rods are not yet activated. Cones need a lot of light to work properly; rods need less light to work, but they need about 7-10 minutes to take over for the cones. After 7-10 minutes in the dark, the rods do work, but you cannot see colors very well because the rods do not provide any color information. The cones, which do provide color information, need more light, but do not work well in the dark. After the movie is over and you leave the theater, everything looks very bright and it is hard to see for a minute or two. This is because the rods become "saturated" and stop working in these bright conditions. It takes a few minutes for the cones to begin to function again, and for normal vision to be restored.

A complete lesson plan on the eye and its connections - teacher and student guides available. Also, try some experiments to test your sense of sight and take a short, interactive quiz about the eye and sight.

The front of the eye consists of the cornea, pupil, iris, and lens. The cornea is the transparent, external part of the eye. It covers the pupil and the iris and is the first location of light refraction. The pupil is the opening in the iris that allows light to enter the eye. The iris is the colored portion of the eye that surrounds the pupil and along with local muscles can control the size of the pupil to allow for an appropriate amount of light to enter the eye. The lens is located behind the pupil and iris. The lens refracts light to focus images on the retina. Proper focusing requires the lens to stretch or relax, a process called accommodation.

The retina is the light-sensitive region in the back of the eye where the photoreceptors, the specialized cells that respond to light, are located. The retina covers the entire back portion of the eye, so it’s shaped like a bowl. In the middle of the bowl is the fovea, the region of highest visual acuity, meaning the area that can form the sharpest images. The optic nerve projects to the brain from the back of the eye, carrying information from the retinal cells. Where the optic nerve leaves, there are no photoreceptors since the axons from the neurons are coming together. This region is called the optic disc and is the location of the blind spot in our visual field.

Figure 19.1. Cross section of the eye. The visible regions of the eye include the cornea, pupil (gray region), and iris (blue region). The lens sits behind the pupil and iris. The retina (red line) is located along the back of the eye. The fovea (dark red section) is a small portion of the retina where visual acuity is highest, and the optic disc is located where the optic nerve (tan region) leaves the eye. Details about the functions of each region are in the text. ‘Eye Anatomy’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Retinal Cells

In addition to the photoreceptors, there are four other cell types in the retina. The photoreceptors synapse on bipolar cells, and the bipolar cells synapse on the ganglion cells. Horizontal and amacrine cells allow for communication laterally between the neurons.

Figure 19.2. There are five cell types in the retina. The photoreceptors synapse on bipolar cells, and the bipolar cells synapse on ganglion cells. The horizonal cells allow for communication between photoreceptors by interacting with the photoreceptor-bipolar cell synapse, and the amacrine cells allow for communication between bipolar cells by interacting at the bipolar cell-ganglion cell synapse. ‘Retinal Neurons’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Direction of Information

When light enters the eye and strikes the retina, it must pass through all the neuronal cell layers before reaching and activating the photoreceptors. The photoreceptors then initiate the synaptic communication back toward the ganglion cells.

Figure 19.3. When light enters the eye, it must pass through the ganglion and bipolar cell layers before reaching the photoreceptors. The neuronal communication travels in the opposite direction from the photoreceptors toward the ganglion cells. ‘Light in the Retina’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

The photoreceptors are the specialized receptors that respond to light. There are two types of photoreceptors: rods and cones. Rods are more sensitive to light, making them primarily responsible for vision in low-lighting conditions like at night. Cones are less sensitive to light and are most active in daylight conditions. The cones are also responsible for color vision.

Figure 19.4. The rods and cones have different physical appearances and play separate roles in visual processing. ‘Rod and Cone’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Receptor Density

In addition to having different visual functions, the rods and cones are also distributed across the retina in different densities. The cones are primarily found in the fovea, the region of the retina with the highest visual acuity. The remainder of the retina is predominantly rods. The region of the optic disc has no photoreceptors because the axons of the ganglion cells are leaving the retina and forming the optic nerve.

Figure 19.5. Rods and cones are distributed across the retina in different densities. Cones are located at the fovea. Rods are located everywhere else. The optic disc lacks all photoreceptors since the optic nerve fibers are exiting the eye at this location. ‘Retinal Receptor Density’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Phototransduction

The photoreceptors are responsible for sensory transduction in the visual system, converting light into electrical signals in the neurons. For our purposes, to examine the function of the photoreceptors, we will A) focus on black and white light (not color vision) and B) assume the cells are moving from either an area of dark to an area of light or vice versa.

Photoreceptors do not fire action potentials; they respond to light changes with graded receptor potentials (depolarization or hyperpolarization). Despite this, the photoreceptors still release glutamate onto the bipolar cells. The amount of glutamate released changes along with the membrane potential, so a hyperpolarization will lead to less glutamate being released. Photoreceptors hyperpolarize in light and depolarize in dark. In the graphs used in this lesson, the starting membrane potential will depend on the initial lighting condition.

Figure 19.6. Photoreceptors respond with graded potentials when moving from light to dark or vice versa. A) When moving from dark to light, the photoreceptor will hyperpolarize, and glutamate release will decrease. B) When moving from light to dark, the photoreceptor will depolarize, and glutamate release will increase. ‘Photoreceptor Receptor Potentials’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

In the dark, the photoreceptor has a membrane potential that is more depolarized than the “typical” neuron we examined in previous chapters; the photoreceptor membrane potential is approximately -40 mV. Photoreceptors have open cation channels that allow the influx of sodium and calcium in the dark. These channels are gated by the presence of cyclic GMP (cGMP), a molecule important in second-messenger cascades that is present in the photoreceptor in the dark.

Figure 19.7. In the dark, the photoreceptor is depolarized due to an influx of sodium and calcium through open ion channels that are gated by cGMP. The photoreceptor has high levels of cGMP when it is in the dark. Additionally, the opsin proteins, the G-protein transducin, and phosphodiesterase (PDE) are all inactivated. ‘Retinal Dark Current’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

When the photoreceptor moves into the light, the cell hyperpolarizes. Light enters the eye, reaches the photoreceptors, and causes a conformational change in a special protein called an opsin. This change activates a G-protein called transducin, which then activates a protein called phosphodiesterase (PDE). PDE breaks down cGMP to GMP, and the cGMP-gated ion channels that were open in the dark close. The decrease in cation flow into the cell causes the photoreceptor to hyperpolarize.

Animation 19.1. Light reaching the photoreceptor causes a conformational change in the opsin protein, which activates the G-protein transducing. Transducin activates phosphodiesterase (PDE), which converts cGMP to GMP. Without cGMP, the cation channels close, stopping the influx of positive ions. This results in a hyperpolarization of the cell. ‘Phototransduction’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License. View static image of animation.

Photoreceptors synapse onto bipolar cells in the retina. There are two types of bipolar cells: OFF and ON. These cells respond in opposite ways to the glutamate released by the photoreceptors because they express different glutamate receptors. Like photoreceptors, the bipolar cells do not fire action potential and only respond with graded postsynaptic potentials.

OFF Bipolar Cells

In OFF bipolar cells, the glutamate released by the photoreceptor is excitatory. OFF bipolar cells express ionotropic glutamate receptors. In the dark, glutamate released by the photoreceptor activates the ionotropic receptors, and sodium can flow into the cell, depolarizing the membrane potential. In the light, the absence of glutamate causes the ionotropic receptors to close, preventing sodium influx, hyperpolarizing the membrane potential.

Figure 19.8. Photoreceptors hyperpolarize in light and decrease the amount of released glutamate. Glutamate is excitatory in OFF bipolar cells, opening ionotropic receptors and allowing sodium influx. In the dark, the OFF bipolar cells are depolarized, and in the light the OFF bipolar cells are hyperpolarized. ‘Off Bipolar Cells’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

ON Bipolar Cells

In ON bipolar cells, the glutamate released by the photoreceptor is inhibitory. ON bipolar cells express metabotropic glutamate receptors. In the dark, glutamate released by the photoreceptor activates the metabotropic receptors, and the G-proteins close cation channels in the membrane, stopping the influx of sodium and calcium, hyperpolarizing the membrane potential. In the light, the absence of glutamate results in the ion channels being open and allowing cation influx, depolarizing the membrane potential.

Figure 19.9. Photoreceptors hyperpolarize in light and decrease the amount of released glutamate. Glutamate is inhibitory in ON bipolar cells, activating metabotropic receptors, which closes cation channels. In the dark, the ON bipolar cells are hyperpolarized, and in the light the ON bipolar cells are depolarized. ‘ON Bipolar Cells’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Ganglion Cells

OFF and ON bipolar cells synapse on OFF-center and ON-center ganglion cells, respectively. Ganglion cells are the only cell type to send information out of the retina, and they are also the only cell that fires action potentials. The ganglion cells fire in all lighting conditions, but it is the relative firing rate that encodes information about light. A move from dark to light will cause OFF-center ganglion cells to decrease their firing rate and ON-center ganglion cells to increase their firing rate.

Figure 19.10. A move from dark to light will hyperpolarize all photoreceptors. OFF bipolar cells will also hyperpolarize in light, which will lead to a decreased firing rate in OFF-center ganglion cells. ON bipolar cells will depolarize in light, which will lead to an increased firing rate in ON-center ganglion cells. ‘Retinal Ganglion Cells’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Each bipolar and ganglion cell responds to light stimulus in a specific area of the retina. This region of retina is the cell’s receptive field. Receptive fields in the retina are circular.

Size of the receptive field can vary. The fovea has smaller receptive fields than the peripheral retina. The size depends on the number of photoreceptors that synapse on a given bipolar cell and the number of bipolar cells that synapse on a given ganglion cell, also called the amount of convergence.

Figure 19.11. Ganglion receptive field sizes can vary depending on location of the bipolar and ganglion cells and the amount of convergence onto those cells. When the photoreceptors are in or near the fovea (Cell 1), the receptive fields are small. In the fovea, each bipolar cell receives input from only one photoreceptor and then synapses on only one ganglion cell. Toward the periphery (Cells 2 and 3), more photoreceptors synapse on each bipolar cell, and more bipolar cells synapse on each ganglion cell, making the surface area of the receptive field larger. ‘Retinal Receptive Field’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Let’s use an example of an ON bipolar cell to look at the structure of receptive fields in the retina. The bipolar and ganglion cell receptive fields are divided into two regions: the center and the surround. The center of the receptive field is a result of direct innervation between the photoreceptors, bipolar cells, and ganglion cells. If a light spot covers the center of the receptive field, the ON bipolar cell would depolarize, as discussed above; the light hits the photoreceptor, it hyperpolarizes, decreasing glutamate release. Less glutamate leads to less inhibition of the ON bipolar cell, and it depolarizes.

Figure 19.12. A photoreceptor in the center of an ON bipolar cell’s receptive field moves from dark to light. The photoreceptor will hyperpolarize, and the ON bipolar cell will depolarize. The red arrows show the direct synaptic communication from photoreceptor to ON bipolar cell. ‘Light in Center’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

The surround portion of the receptive field is a result of indirect communication among the retinal neurons via horizontal and amacrine cells. The surround also has an opposing effect on the bipolar or ganglion cell compared to the effect of the center region. If a light spot covers the surround portion, the ON bipolar cell would respond by hyperpolarizing. The light would cause the photoreceptor in the surround to hyperpolarize. This would cause the horizontal cell to also hyperpolarize. Horizontal cells have inhibitory synaptic effects, so a hyperpolarization in the horizontal cell would lead to a depolarization in the center photoreceptor. The center photoreceptor would then cause a hyperpolarization in the ON bipolar cell. These effects mimic those seen when the center is in dark. So even though the center photoreceptor is not directly experiencing a change in lighting conditions, the neurons respond as if they were moving toward dark.

Figure 19.13. A photoreceptor in the surround of an ON bipolar cell’s receptive field moves from dark to light. The photoreceptor will hyperpolarize, and the postsynaptic horizontal cell will hyperpolarize. This will cause the center photoreceptor to depolarize, and the ON bipolar cell to hyperpolarize. The red arrows show the indirect synaptic communication between the surround photoreceptor and the ON bipolar cell. The surround photoreceptor synapses on the horizontal cell, which synapses on the center photoreceptor, which synapses on the bipolar cell. ‘Light in Surround’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

The center-surround structure of the receptive field is critical for lateral inhibition to occur. Lateral inhibition is the ability of the sensory systems to enhance the perception of edges of stimuli. It is important to note that the photoreceptors that are in the surround of one bipolar cell would also be in the center of a different bipolar cell. This leads to a direct synaptic effect on one bipolar cell while also having an indirect effect on another bipolar cell.

Figure 19.14. An edge of a light stimulus moves into the receptive field surround of ON bipolar cell B. This edge is also falling on the receptive field center of ON bipolar cell C. The light will cause bipolar cell C to depolarize because of the direct synapse with the photoreceptor. The light will also cause bipolar cell B to hyperpolarize because of the indirect synapses through the horizontal cell. This hyperpolarization causes a larger membrane potential difference between cells B and C that would occur if the horizontal cells were absent. The larger membrane potential difference between the cells will lead to an enhancement in the perception between the dark and light side of the edge. ‘Lateral Inhibition’ by Casey Henley is licensed under a Creative Commons Attribution Non-Commercial Share-Alike (CC BY-NC-SA) 4.0 International License.

Although some of the images used here will simplify the receptive field to one cell in the center and a couple in the surround, it is important to remember that photoreceptors cover the entire surface of the retina, and the receptive field is two-dimensional. Depending on the level of convergence on the bipolar and ganglion cells, receptive fields can contain many photoreceptors.

How does light reach the optic nerve?

Light passes through the front of the eye (cornea) to the lens. The cornea and the lens help to focus the light rays onto the back of the eye (retina). The cells in the retina absorb and convert the light to electrochemical impulses which are transferred along the optic nerve and then to the brain.

Where does light go after photoreceptors?

4.4. Photoreceptors are specialized neurons found in the retina that convert light into electrical signals that stimulate physiological processes. Signals from the photoreceptors are sent through the optic nerve to the brain for processing.

What pathway does light take to send images to the brain?

Optic nerve: This cranial nerve sends visual information from your retina to your brain. It consists of more than 1 million nerve fibers.

How light entering the eye results in action potentials in the optic nerve?

When light enters the eye and strikes the retina, it must pass through all the neuronal cell layers before reaching and activating the photoreceptors. The photoreceptors then initiate the synaptic communication back toward the ganglion cells. Figure 19.3.